Sales 1800-374-5551
already installed
on our systems

ClickFit metal roofs

Steel roofs are often found in barns and sheds in agriculture, livestock and industrial environments. Steel roofs are often trapezium-shaped, or they have the shape of a standard corrugated sheet. Insulated steel roofs are also called sandwich roofs, because they often consist of several layers of steel with a core of polyurethane. It is easy to place solar panels on every steel roof by using the patented ClickFit system.


The ClickFit assembly system is attached to the top sheet of the roof by means of mounting brackets and special self-tapping plate screws. The special self-tapping plate screws do not chip, but displace the material of the top sheet. Additional material is hereby created in which a screw thread is tapped with this operation. Unlike pop rivets or self-tapping screws, the material does not get weakened, but rather strengthened at the position of the screw. This makes it possible to make a proper and durable connection at a top sheet thickness of only 0,5 millimetres. To make the roof waterproof, water-repellent EPDM rubber is placed between the mounting bracket and the roof.

The mounting rail is simply clicked onto the mounting brackets. The application of the mounting rail is easy and is done entirely without screws, bolts, nuts and tools .

The solar panels are hung onto the mounting rail by using the installation aid, so that the solar panels can be easily slid into the right place. The solar panels are subsequently screwed onto the mounting rail by using mounting screws and universal clamps. There is already a special screw thread in the mounting rail that simplifies the screwing in of the solar panels.

Materials and tools

The ClickFit assembly system is suitable for all brands and types of solar panels. The system is made of durable and high quality aluminium and stainless steel components.

There are special black clamps and caps for black solar panels that are placed over the assembly profile and the mounting screws. This gives the solar panels and the assembly system a complete black finish.

There is only a 10 mm socket wrench needed for the assembly of the solar panels.


Every roof is different. As a customer, you can rely on our knowledge and expertise. Our experienced staff can provide you with the necessary advice and support. We are happy to help you calculate the materials required for your project.

By using our ClickFit calculator, you can easily calculate yourself what materials you need and you can be sure you are using the right materials for every situation. The ClickFit calculator is only available for the professional installer.

If you want to use the ClickFit calculator, but have no password, then request this from us via the contact page.

Guaranteed that it's good!

The ClickFit system for steel roofs has been extensively tested and certified by NQA with MCS012 and complies fully with the applicable requirements and standards, such as the NEN 7250 and the Dutch Building Decree. The ClickFit assembly system comes standard with a 20 years guarantee. The quality of the system is thus guaranteed and it offers the security that is needed.

The advantages
of our systems

Super quick installation 20 years’ warranty on our productsOutstanding service and advice 12 Years  experience

your project


Manuals, datasheets en certificates
Esdec Inc. | Disclaimer | Cookie | Privacy | Actilus webdesign